Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Effects of calcination temperature on physicochemical property and activity of CuSO4/TiO2 ammonia-selective catalytic reduction catalysts

CuSO_4/TiO_2 catalysts with high catalytic activity and excellent resistant to SO_2 and H_2 O,were thought to be promising catalysts used in Selective catalytic reduction of nitrogen oxides by NH_3.The performance of catalysts is largely affected by calcination temperature.Here,effects of calcination temperature on physicochemical property and catalytic activity of CuSO_4/TiO_2 catalysts were investigated in depth.Catalyst samples calcined at different temperatures were prepared first and then physicochemical properties of the catalyst were characterized by N2 adsorption-desorption,X-ray diffraction,thermogravimetric analysis,Raman spectra,Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,temperature-pro grammed desorption of NH_3,temperature-programmed reduction of H_2 and in situ diffuse reflectance infrared Fourier transform spectroscopy.Results revealed that high calcination temperature had three main effects on the catalyst.First,sintering and anatase transform into rutile with increase of calcination temperature,causing a decrement of specific surface area.Second,decomposition of CuSO_4 under higher calcination temperature,resulting in disappears of Br(?)nsted acid sites(S-OH),which had an adverse effect on surface acidity.Third,CuO from the decomposition of CuSO_4 changed surface reducibility of the catalyst and favored the process of NH_3 oxidation to nitrogen oxides(NO_x).Thus,catalytic activity of the catalyst calcined under high temperatures(≥600℃) decreased largely.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

福建省2005-2017年大气边界层SO2的时空变化特征

为研究近年来福建省SO₂污染的时空动态特征,利用臭氧观测仪（ozone monitoring instrument,OMI）卫星遥感反演的PBL（planetary boundary layer,大气边界层）SO₂柱含量数据,分析了2005-2017年福建省PBL SO₂柱含量的时空间分布特征.结果表明:①在长时间尺度上,PBL SO₂柱含量的变化趋势可分为2个时段,其中,2005-2011年PBL SO₂柱含量呈逐渐上升趋势,6 a增加了约0.027 DU,增长率约为6.12%;2011-2017年PBL SO₂柱含量呈下降趋势,7 a减少了约0.018 DU,下降率约为3.89%.②PBL SO₂柱含量呈明显的周期性变化特征,最小值和最大值分别出现在6月和12月,多年平均值分别约为0.383和0.555 DU.③PBL SO₂柱含量的3个高值区分别出现在沿海的福州市,厦门市、漳州市东部和泉州市西部,三明市和南平市部分地区,这3个高值区多年平均PBL SO₂柱含量分别约为0.505、0.495和0.485 DU.从城市尺度上来看,PBL SO₂柱含量最大值出现在厦门市,其多年平均值为（0.486±0.015）DU;其次为福州市,PBL SO₂柱含量多年平均值为（0.465±0.026）DU;最低值出现在漳州市,PBL SO₂柱含量多年平均值为（0.429±0.020）DU.④福建省PBL SO₂柱含量变化趋势在空间分布上存在明显的差异,不同时期、不同区域变化趋势不一致.2005-2011年PBL SO₂柱含量的变化范围为-0.13~0.18 DU,变化率范围为-25%~50%,PBL SO₂柱含量出现增长的区域主要是在高值区,如龙岩市西部、厦门市北部以及三明市东部等区域;2011-2017年PBL SO₂柱含量的变化范围为-0.13~0.15 DU,变化率范围为-29%~34%.2011-2017年福州市和厦门市PBL SO₂柱含量下降最为明显,减少了约0.10 DU,下降率约为25%.研究显示,卫星遥感估算的PBL SO₂柱含量具有一定的可靠性,可以用于区域SO₂污染的研究.      

水力空化-酸化调理增强污泥脱水性能分析

研究了水力空化-酸化调理作用于污泥脱水的机理。以污泥比阻（specific resistance to filtration,SRF）、污泥含水率和污泥毛细吸水时间（capillary sunction time,CST）作为主要的评价指标,测定污泥胞外聚合物（extracellular polymeric substances,EPS）中多糖、蛋白含量并进行了污泥酸化程度、污泥电子显微图像分析。结果表明:经水力空化-酸化调理污泥,污泥含水率和SRF分别从83.1%和5.12×1011 m/kg下降到69.8%和2.41×1011 m/kg,CST由50 s下降至20.8 s,各EPS组分含量下降明显,酸化作用通过影响污泥的溶解型胞外聚合物（S-EPS）和松散结合型胞外聚合物（LB-EPS）中的多糖及蛋白含量改变污泥的脱水性,pH=3时污泥脱水效果最好。综上所述,水力空化-酸化调理能大大增强污泥的脱水性能,在实际工程中具有很大的应用价值。     

日本城市有机废弃物甲烷发酵资源化系统案例分析及最新研究进展

为建设可持续发展社会,日本近年来大力推动甲烷发酵以实现城市有机废弃物的减量化和资源化。首先介绍了日本城市有机废弃物资源化的2个实用案例,长冈市厨余垃圾沼气发电中心和丰桥市生物质资源利用中心的设计和运营状况。两者的长期稳定运行及产能效果验证了甲烷发酵技术在城市有机废弃物减量化和资源化上的可行性。其次,为了应对社会发展趋势和城市有机废弃物处理的技术需求,介绍了日本有关厨余垃圾、污泥以及废纸（城市有机废弃物的3大组分）的单独发酵及共发酵的部分研究成果。此外,简要介绍了应用厌氧膜生物反应器（AnMBR）进行相关高效甲烷发酵的最新研究成果。并根据实用案例调查和实验研究结果,以100万人口城市为例,对城市有机废弃物的各种甲烷发酵系统的产能效果进行了模拟概算。     

长江流域2000—2015年生态系统质量及服务变化特征

分析生态系统质量与服务现状及变化特征,有助于准确了解流域生态系统状况与趋势,为流域生态保护与修复的高效管理提供参考依据.采用相对生物量密度与相对植被覆盖度指数以及生态系统服务（土壤保持、防风固沙、洪水调蓄、粮食生产）评估模型,评估2000—2015年长江流域生态系统质量及服务变化特征.结果表明:①2000—2015年,长江流域森林、灌丛以及草地生态系统质量提升显著,56.56%的森林、45.65%的灌丛以及19.26%的草地生态系统质量得到不同程度的提高.②研究期间,长江流域粮食生产、洪水调蓄、土壤保持、防风固沙均呈显著上升趋势,其中粮食生产能力增加13.7%,洪水调蓄功能提升10.1%,土壤保持服务提高19.5%,防风固沙总量增加30.0%.③长江流域生态系统质量不高,处于低与差质量等级的生态系统面积比例在25%~35%之间;受不同类型的自然和人类活动影响,长江流域生态系统质量与服务均存在局部退化现象.研究显示,在生态质量与服务评估的基础上,分区域、分类型实施不同的生态系统保护与恢复途径,是今后长江流域加强生态系统管理的重要途径.